ARMONIA
Description:
ARMONIA is a multifunctional panel enable to supply reading, examination and night light. The examination light needs the complete power of the LEDs while the reading light is settled by an electronic switching system that reduces the power and, as a consequence, the luminous flux of LEDs. The indirect general light is controlled separately and enables to completely illuminate the patient room.
General information
- Body: Steel supporting structure and MDF frontal panels
- Diffuser: Opal methacrylate diffuser for reading/examination lighting - Opal polycarbonate diffuser for general lighting
- Protection degree IP: IP20 general - IP40 lighting circuit - IP21 electrical sockets
- Standard colour: Opaque RAL9010
- SURFACE TREATMENT ON REQUEST: Anodization, antimicrobial coating, decorative finishing. Check the possible finishings
- Electrical equipment: White UNEL 2x10 / 16A + T current socket, no.2 3-module plate flush finish, 3-button keypad and data socket.
Details relating to one bed behead unit 1400 mm long
- General light: 33W - 2376lm - 4000K
- Reading light: 33W - 2240lm - 4000K
- Night light: 3W - 200lm - 4000K
For specific needs, please contact our Sales Department.
COMMERCIAL NOTE: ARMONIA devices are not intended for German market.
CLASSIFICATION ACCORDING TO THE 93/42/CEE DIRECTIVE
- I class (no gas) - IIa/IIb (with gas)
- Non-stop operation
- No sections are applie
- Suitable for the installation in group 0, 1 and 2 medical premises
- Not suitable for the installation in explosion risk environments (locations with gases and flammable vapours)
- Not suitable for the installation in environments with an oxygen amount superior to the 25% with an environmental pressure until the 110kPa in usual circumstances
- Not suitable for the categories AP and APG provisions
REFERENCE DIRECTIVES AND REGULATIONS
93/42/CEE; UNI EN ISO 11197; CEI EN 60601-1; CEI EN 60598; CEI EN 55015; CEI EN 61547; UNI CEI EN ISO 14971; UNI CEI EN ISO 13485
- I class (no gas) - IIa/IIb (with gas)
- Non-stop operation
- No sections are applie
- Suitable for the installation in group 0, 1 and 2 medical premises
- Not suitable for the installation in explosion risk environments (locations with gases and flammable vapours)
- Not suitable for the installation in environments with an oxygen amount superior to the 25% with an environmental pressure until the 110kPa in usual circumstances
- Not suitable for the categories AP and APG provisions
REFERENCE DIRECTIVES AND REGULATIONS
93/42/CEE; UNI EN ISO 11197; CEI EN 60601-1; CEI EN 60598; CEI EN 55015; CEI EN 61547; UNI CEI EN ISO 14971; UNI CEI EN ISO 13485
TELL YOUR NEEDS
We are specialists in designing customized lighting solutions in a short time.
If you are an architect, a designer or a manager, contact us to explain your needs in detail.
We are specialists in designing customized lighting solutions in a short time.
If you are an architect, a designer or a manager, contact us to explain your needs in detail.